TICC-W series central water-cooled chillers adopt Germanmade BITZER with twin screw compressors,models with one or two compressors,
suitable for using R22，R407 and R134a refrigerants. High efficiency condenser and evaporator have manufactured under national"BR1"
standard. Featuring stable heat exchange and ease of maintenance advanced contriller with built- -in microprocessor which gives better perfor?mance than single chip based unit.
德國制半密閉式雙螺桿緊縮機，軸承壽命長，可確保永劫間運行 ;
緊縮機多級能量調理，可依客戶需要作調劑以到達節能的結果 ;
冷凝器與蒸發器均合適國度請求，高熱互換機能，且維修頤養便利 ;
節制器擴通機能杰出，可便利硬件及法式的擴大與進級 ;
Watchdog 手藝使微電腦節制器的硬件組件具備自我診斷才能，能主動檢測毛病 ;
裝備不變性高的影象本，512K 的程式存儲容量及 128K 的斷電數據保管容量，可大批存儲材料且不會散失 ;
怪異的螢幕掩護體系使觸控屏壽命可達十年以上 ;
毛病查問功效與毛病統計功效能夠按毛病序號、毛病次數和產生時候來闡發毛病產生緣由，以便加以改良 ;
可隨時檢查各點現實溫度作點竄設定，另外尚可顯現一小時及一天的溫度曲錢 ;
具備遠端遙控開關機功效，可完成一次按時開關機及每周按時開關機的利用，天天最多可設定開關機達 3 次 ;
增援多說話在織切換。
German-made twin screw compressor,long service life to ensure can make sure continuous operation.
Two energy saving modes are designed to meet customers requirements.
Evaporator and condenser built strictly according to national standards.
Extendability of the controller makes upgrade of both hardware and software more easier.
"Watchdog" technology makes microprocessor able to automatically diagnose and solve the problems.
512K memory for programs and 128K off-power data storage.
Touch screen panel.
System alarm text.
Able to monitor the setting of actual temp and display temp trend in hours or in daily.
Remote control function turns on/off the machine according to preset timer.
Support multi -language switch.
1) 參數測試前提 : 冷凍水進口溫度 12°C, 出口溫度 7°C，冷水進口 30。C，出口溫度 35 °C;
2) 樂音測試距主機正后方 1m，高 1 .5;
3) 可依客戶工程所需，選配無段容調功效 ;
4) 若有特別請求，定貨前請提出請求標準 ;
5)“S”代表單緊縮機。
1)The refrigerant capacity is tested under conditions that process water inlet temp.is at 12C，process water outlet temp.is ai 7C,cooling water inlet temp.is at
30"C and cooling water outlet temp.is at 35"C.The contamination status is on 0.0001M20C/W.
2)The noise level is tested on one meter in front of the machine and 1.5 meter in height.
3)The function of un-adjustable refrigerant flow can be selected.
4)Please inform the special requirements to us before giving and order.
5) "S" stands for single compressor.
1) 參數測試前提 : 冷凍水進口溫度 12°C, 出口溫度 7°C，冷水進口 30。C，出口溫度 35 °C;
2) 樂音測試距主機正后方 1m，高 1 .5;
3) 可依客戶工程所需，選配無段容調功效 ;
4) 若有特別請求，定貨前請提出請求標準 ;
5)“S”代表單緊縮機。
1)The refrigerant capacity is tested under conditions that process water inlet temp.is at 12C，process water outlet temp.is ai 7C,cooling water inlet temp.is at
30"C and cooling water outlet temp.is at 35"C.The contamination status is on 0.0001M20C/W.
2)The noise level is tested on one meter in front of the machine and 1.5 meter in height.
3)The function of un-adjustable refrigerant flow can be selected.
4)Please inform the special requirements to us before giving and order.
5) "S" stands for single compressor.
注：1) 參數測試前提 : 冷凍水進口溫度 12°C, 出口溫度 7°C，冷水進口 30。C，出口溫度 35 °C;
2) 樂音測試距主機正后方 1m，高 1 .5;
3) 可依客戶工程所需，選配無段容調功效 ;
4) 若有特別請求，定貨前請提出請求標準 ;
5)“D”代表雙緊縮機。
Note: 1)The refrigerant capacity is tested under conditions that process water inlet temp.is at 12C，process water outlet temp.is ai 7C,cooling water inlet temp.is at
30"C and cooling water outlet temp.is at 35"C.The contamination status is on 0.0001M20C/W.
2)The noise level is tested on one meter in front of the machine and 1.5 meter in height.
3)The function of un-adjustable refrigerant flow can be selected.
4)Please inform the special requirements to us before giving and order.
5) "D" stands for double compressor.
1) 參數測試前提 : 冷凍水進口溫度 12°C, 出口溫度 7°C，冷水進口 30°C;，出口溫度 35 °C;
2) 樂音測試距主機正后方 1m，高 1 .5;
3) 可依客戶工程所需，選配無段容調功效 ;
4) 若有特別請求，定貨前請提出請求標準 ;
5)“D”代表雙緊縮機。
1)The refrigerant capacity is tested under conditions that process water inlet temp.is at 12C，process water outlet temp.is ai 7C,
cooling water inlet temp.is at 30"C and cooling water outlet temp.is at 35"C.The contamination status is on 0.0001M20C/W.
2)The noise level is tested on one meter in front of the machine and 1.5 meter in height.
3)The function of un-adjustable refrigerant flow can be selected.
4)Please inform the special requirements to us before giving and order.
5) "D" stands for double compressor.
| 
